Year | 2025 |
Manufacturer | LOAD TRAIL |
Brand | TANDEM AXLE DUMP |
Model | DE10 |
Type | Dump Trailer |
Class | |
Fuel Type | |
Status | New |
Stock # | 4000722 |
Financing Available | |
Warranty Available | |
Odometer | |
VIN | |
Chassis | |
Engine | |
Transmission | |
Suspension | N/A |
Leveling | N/A |
Exterior Length | 10.0 ft. |
Dry Weight | 2266 lbs. |
Sleeping Capacity | N/A person(s) |
Interior Colour | N/A |
Exterior Colour | N/A |
Slideouts | N/A |
Disclaimer: Product information, pricing and photos are as accurate as possible and are subject to change without notice.
2025 - 60” X 10FT TANDEM AXLE DUMPBOX – (7,000 LB GVW) W/ADDITIONAL OPTIONS:
-L.E.D. LIGHT PACKAGE all LED lights
-AIRFLOW THROUGH TARP WITH LOCKING MECHANISM Custom air flow through tarp with front housing shield that protects tarp from elements and debris. Locking mechanism at rear of dumpbox. Tarp has metal eyelets every two feet and there are tarp tie down hooks around the top of the box for ease of ensuring no escaping of the dumpbox contents.
-SIDEBOARD PROTECTION, added so that when loading, if loader hits the top of the side, board can be easily replaced with little cost vs hitting the steel side and doing major, costly damage.
-2 WAY ENDGATE Opens barn door style for loading of equipment or dumping contents (if dumping, there are H.D.door hold backs to hold the doors to the side of trailer to prevent damaging doors which would come in contact with the ground if dumpbox is fully raised). The end gate has spreader chains and a locking lever so can control spreading or dumping of material.
-2” COUPLER (ADJUSTABLE HEIGHT) W/locking mechanism
-6” I-BEAM TONGUE AND FRAME w/ 2” x 4” square tubing frame, 16” C-Channel crossmembers - construction grade built
-HEAVY DUTY CYLINDER PACKAGE 3” X 24”
-4 - 3” D-RINGS INSIDE FOUR CORNERS OF BOX - safely secure equipment/load
-18” HIGH RIBFORMED SIDES FOR EXTRA STRENGTH, heavy duty 10 GAUGE FLOOR AND SIDES.
-HEAVY DUTY DIAMOND PLATED FENDERS, built strong to withstand tough usage
-WIRED REMOTE-CONTROL W/MAGNETS, come with 15ft of cord, so when at rear or side of trailer, simply attach to the box
-ELEC/HYDRAULIC SYSTEM WITH DIRECT CHARGE ACCESSORY, INLINE FUSE-PROTECTION ON CHARGING SYSTEM, ALL COMPONENTS STORED IN LOCKING TOOLBOX, USA made with 3200 lbs working pressure (this determines lifting capacity, as other manufacturers utilize inferior power units). In line fuse protections prevents burnout/damage to power unit from electrical surges from towing vehicle. High output 12-volt deep cycle battery with the 5 AMP AC/DC direct charge unit maintains full charge on the battery and prevents the battery from freezing in the winter.
-STAKE POCKETS built into all sides for the ability to add 2 ft, 3 ft or 4 ft side extensions
-7,000LB DROPLEG JACK greaseable gears
-5 FT SLIDE IN RAMPS Heavy Duty Ramps, fabricated out of 3” C- Channel
-2 – 3500LB DEXTER AXLES W/ SELF ADJUSTING ELECTRIC BRAKES AND EZEE LUBE HUBS No need to occasionally jack up the trailer and set up the brakes as they automatically set. This is a safety feature with the brakes always properly adjusted.
-MODULAR WIRING – SEVERE ROAD WIRING PACKAGE UPGRADE State of the art wiring, no plastic clips joining wires, lights, etc. Comes with breakaway battery wiring kit.
-COLD WEATHER HARNESS(UPGRADE) – certified to -85 Celsius, never stiff, sealed and heavy duty
-FULL GVW RADIAL TIRES ST 205/75/R15
-POWDURA ONE CURE EPOXY PRIMER – greatly enhances longevity and durability of topcoat
-RAVEN BLACK – GLOSS POLYESTER POWDER COATED PAINT
STOCK #4000722
SPARE TIRE/RIM ADD $185
WEIGHT 2266 LBS